Screw Cement Board Screws and Nails
Self-drilling countersunk flat-head screw with and without handle.
PRODUCT DESCRIPTION
Self-drilling steel screw with countersunk flat head, wings and drill point. White galvanized and organometallic finishes**
FEATURES AND ADVANTAGES
- Drills and joins metal plates and profiles (LSF) in a single operation.
- The handle creates the through hole in the element to be fixed.
- Applied with a screwdriver.
MAIN APPLICATIONS
- Construction of light steel frame walls.
- Assembly of composite floor panels (floor wall and panel wall).
| Code | Dimensions (mm) | Reference measurements | Surface finish | PHS key n° | Tip | Plate thickness (mm) | Drilling capacity* (mm) | ||
|---|---|---|---|---|---|---|---|---|---|
| Diameter | Length | Gauge | Length | ||||||
| PPC32 | 4,2 | 32 | #8 | 1.1/4" | Electrolytic galvanized | 2 | 2 | 6 - 16 | 1 - 2,65 |
| PPC50 | 4,8 | 50 | #10 | 2” | Organometallic (500h)* | 2 | 2 | 16 - 30 | 1,5 - 4,0 |
| PPC4232OM | 4,2 | 32 | #8 | 1.1/4" | Organometallic (1000h)* | 2 | 2 | 7 - 16 | 2 - 2,65 |
| PPC4850OM | 4,8 | 50 | #10 | 2” | Organometallic (1000h)* | 2 | 2 | 16 - 30 | 1,5 - 4,0 |
| PPC5576OM | 5,5 | 76 | #12 | 3” | Organometallic (1000h)* | 3 | 3 | 16 - 45 | 2,30 - 5,30 |
Cement
Metal
PRODUCT DESCRIPTION
Self-drilling steel screw with countersunk flat head and drill point.
White galvanized finish.
FEATURES AND ADVANTAGES
- Drills and joins metal plates and profiles (LSF) in a single operation.
- Used to attach various construction elements to metal profiles.
- Applied with a screwdriver.
MAIN APPLICATIONS
- Construction of light steel frame walls.
- Assembly of composite floor panels (floor wall, panel wall).
- Fixes cement board, OSB, Plywood to metal profiles.
| Code | Dimensions (mm) | Reference measurements | Surface finish | PHS key n° | Plate thickness (mm) | Drilling capacity* (mm) | ||
|---|---|---|---|---|---|---|---|---|
| Diameter | Length | Gauge | Length | |||||
| PPCSA32 | 4,2 | 32 | #8 | 1.1/4" | Electrolytic galvanized | 2 | 6 - 16 | 1 - 2,65 |
*Treatment carried out using an aqueous dispersion containing Zinc and Aluminum flakes and other specific chemical agents, specially formulated to protect Iron (steel), Aluminum, Zinc, etc. substrates. It is a basic coating for metal parts that need a high degree of protection, with minimum layer thickness and total absence of hydrogen embrittlement. Chromium-free process.
Cement and OSB
Metal
APPLICATION METHOD
Step: 1/6
Drill the hole to the diameter and depth indicated.
Step: 2/6
Clean the hole.
Step: 3/6
Insert the assembled and adjusted anchor bolt.
Step: 4/6
Tighten it to trigger its
expansion.
expansion.
Step: 5/6
Remove the bolt and washer.
Step: 6/6
Position the part to be fixed, replace the bolt and washer and tighten.
