PBA Wedge anchor Mechanical anchors
Torque-controlled expansion anchor bolt. Composed of expansion bolt, clip, nut and flat washer.
FEATURES AND ADVANTAGES
- Best performance anchor bolts.
in mechanical anchoring. - Used in through assemblies.
- Drill bit diameter the same as the anchor bolt.
- Immediate loading.
- No depth limit for installation.
- Impact tip.
- Available in passivated stainless steel (5).
- Other materials on request.
MAIN APPLICATIONS
- Fixing machinery and equipment.
- Elevators, platforms and overhead cranes.
- Metal structures.
- Storage and handling systems.
- Guardrails, handrails and supports.
Concrete
APPLICATION METHOD
Step: 1/6
Drill the hole to the diameter and depth indicated.
Step: 2/6
Clean the hole.
Step: 3/6
Place the nut and washer on the end of the anchor bolt.
Step: 4/6
Position the part to be fixed and insert the anchor bolt.
Step: 5/6
Use a sledgehammer to drive the anchor bolt into the hole. (5)
Step: 6/6
Tighten the nut causing it to expand, thus completing the fixing.
VIDEO
TECHNICAL DATA
| Code | Thread diameter (inch) | Lengths | Hole | Hef embedment | Distances ³ (mm) | Maximum thickness to be fixed (mm) | Wrench (inch) | Fastening torque (kgf.m) | Ultimate loads² (kgf) | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Anchor bolt (in.) | Min. thread (mm) | Diameter (in - mm) |
Depth ¹ (mm) | Fastener fastener | Fastener edge | Tensile | Shear | ||||||
| X14134C | 1/4″ | 1.3/4" | 19 | 1/4" - 6,5 | 40 | 35 | 105 | 52 | 3 | 7/16" | 0,7 | 920 | 707 |
| X14214C | 2.1/4" | 26 | 16 | ||||||||||
| X14314C | 3.1/4" | 48 | 55 | 50 | 150 | 75 | 26 | 1.070 | |||||
| X56200C | 5/16″ | 2” | 19 | 5/16" - 8 | 50 | 40 | 120 | 60 | 3 | 1/2" | 1,7 | 1.610 | 1.162 |
| X56314C | 3.1/4" | 43 | 65 | 55 | 165 | 82 | 20 | 1.840 | |||||
| X56414C | 4.1/4" | 66 | 45 | ||||||||||
| X38214C | 3/8″ | 2.1/4" | 21 | 3/8" - 9,5 | 55 | 45 | 135 | 67 | 3 | 9/16" | 3 | 2.210 | 1.703 |
| X38234C | 2.3/4" | 27 | 15 | ||||||||||
| X38300C | 3” | 28 | 22 | ||||||||||
| X38312C | 3.1/2" | 41 | 75 | 65 | 195 | 97 | 14 | 2.730 | |||||
| X38334C | 3.3/4" | 48 | 21 | ||||||||||
| X38500C | 5” | 75 | 52 | ||||||||||
| X12234C* | 1/2″* | 2.3/4" | 28 | 1/2" - 13 | 60 | 50 | 150 | 75 | 7 | 3/4" | 6 | 2.407 | 3.030 |
| X12334C* | 3.3/4" | 39 | 33 | ||||||||||
| X12400C* | 4” | 46 | 39 | ||||||||||
| X12414C* | 4.1/4" | 53 | 95 | 80 | 240 | 120 | 15 | 4.900 | |||||
| X12512C* | 5.1/2" | 85 | 47 | ||||||||||
| X12700C* | 7” | 84 | 85 | ||||||||||
| X58312C | 5/8" | 3.1/2" | 39 | 5/8" - 16 | 85 | 70 | 210 | 105 | 3 | 15/16" | 12 | 5.130 | 4.933 |
| X58412C | 4.1/2" | 54 | 28 | ||||||||||
| X58500C | 5” | 54 | 41 | ||||||||||
| X58600C | 6” | 78 | 135 | 120 | 360 | 180 | 17 | 6.750 | |||||
| X58700C | 7” | 104 | 42 | ||||||||||
| X58800C | 8” | 104 | 67 | ||||||||||
| X34414C | 3/4" | 4.1/4" | 44 | 3/4" - 19 | 100 | 80 | 240 | 120 | 9 | 1.1/8" | 23,9 | 5.830 | 7.273 |
| X34434C | 4.3/4" | 56 | 22 | ||||||||||
| X34512C | 5.1/2" | 73 | 41 | ||||||||||
| X34614C | 6.1/4" | 88 | 140 | 120 | 360 | 180 | 20 | 9.460 | |||||
| X34700C | 7” | 103 | 39 | ||||||||||
| X34812C | 8.1/2" | 103 | 77 | ||||||||||
| X34100C | 10” | 118 | 115 | ||||||||||
| X78600C | 7/8" | 6” | 78 | 7/8" - 22 | 120 | 95 | 285 | 142 | 35 | 1.5/16" | 25,8 | 9.550 | 10.013 |
| X78800C | 8” | 98 | 160 | 135 | 405 | 202 | 46 | 12.690 | |||||
| X78100C | 10” | 65 | 97 | ||||||||||
| X78120C | 12” | 148 | 148 | ||||||||||
| X10600C | 1″ | 6” | 78 | 1" - 26 | 130 | 100 | 300 | 150 | 27 | 1.1/2" | 40 | 12.340 | 13.110 |
| X10900C | 9” | 94 | 200 | 170 | 510 | 255 | 33 | 17.640 | |||||
| X10120C | 12” | 148 | 109 | ||||||||||
* 1/2" UNC - 13 fi os.
(1) Standard depth.
(2) The values obtained are based on the average of tests and technical specifications, using ABNT 1010/1020 steel and 30MPa concrete.
Attention: these values are ultimate loads, always use the safety coefficient. For more information, see the Technical Data section on page 135.
(3) Minimum recommended distance, for smaller items consult the technical department.
(4) To order an imported item, add "X" before the code.
Important: When installing anchor bolts in the stainless steel version, use a nylon or rubber mallet to avoid contaminating the surface of the fastener.
(1) Standard depth.
(2) The values obtained are based on the average of tests and technical specifications, using ABNT 1010/1020 steel and 30MPa concrete.
Attention: these values are ultimate loads, always use the safety coefficient. For more information, see the Technical Data section on page 135.
(3) Minimum recommended distance, for smaller items consult the technical department.
(4) To order an imported item, add "X" before the code.
Important: When installing anchor bolts in the stainless steel version, use a nylon or rubber mallet to avoid contaminating the surface of the fastener.
![Item cba prisioneiro 1 thegem portfolio justified[1] copiar](https://ancora.com.br/wp-content/uploads/2022/08/item_cba_prisioneiro-1-thegem-portfolio-justified1-copiar-1.webp)
