PBI - Drop-in Mechanical anchors
Drop-in internal threaded anchor bolt with internal expansion cone.
FEATURES AND ADVANTAGES
- Expansion via mixer (sold separately).
- High load capacity for reduced embedment.
- Internal expander cone for greater control over expansion.
- Quick and easy installation.
| BTP | For internal-threaded anchors and sleeves: PBI | |||||
|---|---|---|---|---|---|---|
| Diameter | 1/4" | 5/16" | 3/8"- M10 | 1/2"- M12 | 5/8" | 3/4" |
| Code | BTP14 | BTP56 | BTP38 | BTP12 | BTP58 | BTP34 |
MAIN APPLICATIONS
- Storage and handling systems.
- Electrical and plumbing installations.
- Machinery and equipment.
- Lifeline and anchor hold installations.
Concrete
APPLICATION METHOD
Step: 1/6
Drill the hole to the diameter and depth indicated.
Step: 2/6
Clean the hole.
Step: 3/6
Insert the anchor bolt.
Step: 4/6
Using a BTP beater and sledgehammer, beat until the anchor bolt expands (see note above).
Step: 5/6
Remove the mixer.
Step: 6/6
Position the part to be fixed, insert the screw and finish fixing.
TECHNICAL DATA
| Code | Thread diameter (inch) | Lengths | Hole | Distances³ (mm) | Indicated bolt length** (mm) | Wrench (inch) | Ultimate loads² (kgf) | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Anchor (mm) | Thread (mm) | Diameter (mm) | Minimum depth¹ (mm) | Fastener fastener | Edge fastener | Tensile | Shear4 | ||||
| PBI14 | 1/4" | 25 | 12 | 9,5 | 27 | 75 | 37 | 10 + tfix | 7/16" | 1.390 | 707 |
| PBI56 | 5/16" | 30 | 14 | 10 | 33 | 90 | 45 | 12 + tfix | 1/2" | 1.510 | 1.162 |
| PBI38 | 3/8" | 40 | 16 | 12 | 43 | 120 | 60 | 14 + tfix | 9/16" | 1.777 | 1.703 |
| PBI12* | 1/2"* | 50 | 22 | 16 | 53 | 150 | 75 | 20 + tfix | 3/4" | 3.070 | 3.030 |
| PBI58 | 5/8" | 65 | 30 | 20 | 70 | 195 | 97 | 28 + tfix | 15/16" | 4.400 | 4.933 |
| PBI34 | 3/4" | 80 | 30 | 26 | 85 | 240 | 120 | 28 + tfix | 1.1/8" | 7.200 | 7.273 |
| PBIM10*** | M10 | 40 | 16 | 12 | 43 | 120 | 60 | 14 + tfix | 17 mm | 1.777 | 1.703 |
| PBIM12*** | M12 | 50 | 21 | 15 | 53 | 150 | 75 | 19 + tfix | 19 mm | 2.763 | 2.841 |
(1) Minimum depth.
(2) The values obtained are based on the average of tests and technical specifications on 30MPa concrete.
Attention: these values are ultimate loads, always use the safety coefficient. For more information, see the Technical Data section on page 135.
(3) Recommended minimum distance, for smaller sizes consult the technical department.
(4) Cutting resistance for G2 bolts.
* Thread 13 UNC or 12 WW. ** tfix = thickness of the part to be fixed. *** Other metric measurements on request.
(2) The values obtained are based on the average of tests and technical specifications on 30MPa concrete.
Attention: these values are ultimate loads, always use the safety coefficient. For more information, see the Technical Data section on page 135.
(3) Recommended minimum distance, for smaller sizes consult the technical department.
(4) Cutting resistance for G2 bolts.
* Thread 13 UNC or 12 WW. ** tfix = thickness of the part to be fixed. *** Other metric measurements on request.
![Item cbn prisioneiro 1 thegem portfolio justified[1] copiar](https://ancora.com.br/wp-content/uploads/2022/08/item_cbn_prisioneiro-1-thegem-portfolio-justified1-copiar.webp)
![Item cba prisioneiro 1 thegem portfolio justified[1] copiar](https://ancora.com.br/wp-content/uploads/2022/08/item_cba_prisioneiro-1-thegem-portfolio-justified1-copiar-1.webp)
