CBA - Sleeve hex bolt Mechanical anchors
Torque-controlled expansion anchor bolts for all types of installation. Composed of screw, washer, jacket and cone. Extension included according to length.
FEATURES AND ADVANTAGES
- Exclusively designed cone with guides that ensure a perfect fit in the jacket and prevent false turns (only for carbon steel parts).
- Simple installation.
- No depth limit for installation.
- High traction performance.
- Excellent value for money.
- White galvanized and hot-dip galvanized finish (other treatments on request).
- Available in passivated stainless steel.
MAIN APPLICATIONS
- Electrical, plumbing, air conditioning, gas and fire systems installation.
- Installation of metal structures and parts.
Concrete
Solid brick
Stone
APPLICATION METHOD
Step: 1/6
Drill the hole to the diameter and depth indicated.
Step: 2/6
Clean the hole.
Step: 3/6
Insert the assembled and adjusted anchor bolt.
Step: 4/6
Tighten it to trigger its
expansion.
expansion.
Step: 5/6
Remove the bolt and washer.
Step: 6/6
Position the part to be fixed, replace the bolt and washer and tighten.
VIDEO
TECHNICAL DATA
| Code | Thread diameter (in) |
Lengths | Hole | Distances ³ (mm) | Max. thickness in fastening (mm) |
Wrench (in) |
Fastening torque (kgf.m) |
Ultimate loads ² (kgf) | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bolt (in) |
Sleeve (mm) |
Extender (mm) |
Diameter (in - mm) |
Depth ¹ (min. - mm) |
Fastener Fastener |
Fastener Edge |
Tensile | Shear | |||||
| XC14200B* | 1/4″ | 2″ | 35 | - | 3/8″ - 10 | 55 | 105 | 52 | 8 | 7/16″ | 0,6 | 1.200 | 707 |
| XC14200** | 1.325 | 877 | |||||||||||
| XC14300B* | 3″ | 25 | 85 | 180 | 90 | 1.220 | 707 | ||||||
| XC14300** | 1.390 | 877 | |||||||||||
| XC56214 | 5/6″ | 2.1/4″ | 38 | - | 1/2″ - 13 | 65 | 114 | 57 | 7 | 1/2″ | 1,6 | 1.840 | 1.162 |
| XC56314 | 3.1/4″ | 28 | 95 | 198 | 99 | 1.950 | |||||||
| XC38212 | 3/8″ | 2.1/2″ | 40 | - | 9/16″ - 14 | 70 | 120 | 60 | 16 | 9/16″ | 2,9 | 2.150 | 1.703 |
| XC38312 | 3.1/2″ | 30 | 100 | 210 | 105 | 14 | 3.070 | ||||||
| XC12300 | 1/2″*** | 3″ | 50 | - | 3/4″ - 19 | 80 | 150 | 75 | 18 | 3/4″ | 5,6 | 4.450 | 3.030 |
| XC12412 | 4.1/2″ | 40 | 120 | 270 | 135 | 20 | 4.630 | ||||||
| XC58312 | 5/8″ | 3.1/2″ | 60 | - | 7/8″ - 22 | 95 | 180 | 90 | 18 | 15/16″ | 11,5 | 4.800 | 4.933 |
| XC58500 | 5″ | 50 | 135 | 330 | 165 | 14 | 5.520 | ||||||
| XC34412 | 3/4″ | 4.1/2″ | 80 | - | 1″ - 26 | 120 | 240 | 120 | 19 | 1.1/8″ | 18,8 | 7.500 | 7.273 |
| XC34612 | 6.1/2″ | 70 | 180 | 450 | 225 | 10 | 8.230 | ||||||
| XC10600 | 1″ | 6″ | 100 | - | 1.1/4″ - 32 | 160 | 300 | 150 | 35 | 1.1/2″ | 35,7 | 10.020 | 13.110 |
| XC10900 | 9″ | 87 | 250 | 561 | 280 | 30 | 14.420 | ||||||
* With G2 bolts ** With G5 bolts *** 1/2" UNC - 13 threads.
(1) Minimum depth. (2) The values obtained are based on the average of tests and technical specifications, using G2 bolts and 30MPa concrete.
Attention: these values are ultimate loads, always use the safety coefficient. For more information, see the Technical Data section on page 135.
(3) Recommended minimum distance. For shorter distances, consult the technical department.
Note: For the hot-dip galvanized version, add "GF" to the end of the code. For the stainless steel version, add "INOX" to the end of the code.
Important: When installing anchor bolts in the stainless steel version, use a nylon or rubber mallet to avoid contaminating the surface of the fastener.
(1) Minimum depth. (2) The values obtained are based on the average of tests and technical specifications, using G2 bolts and 30MPa concrete.
Attention: these values are ultimate loads, always use the safety coefficient. For more information, see the Technical Data section on page 135.
(3) Recommended minimum distance. For shorter distances, consult the technical department.
Note: For the hot-dip galvanized version, add "GF" to the end of the code. For the stainless steel version, add "INOX" to the end of the code.
Important: When installing anchor bolts in the stainless steel version, use a nylon or rubber mallet to avoid contaminating the surface of the fastener.
![Item cbn parafuso 1 thegem portfolio justified[1] copiar](https://ancora.com.br/wp-content/uploads/2022/08/item_cbn_parafuso-1-thegem-portfolio-justified1-copiar-640x640.webp)
![Item cba prisioneiro 1 thegem portfolio justified[1] copiar](https://ancora.com.br/wp-content/uploads/2022/08/item_cba_prisioneiro-1-thegem-portfolio-justified1-copiar-1.webp)
