CBN - Nylon sleeve bolt Mechanical anchors
Accommodating anchor bolt. Composed of bolt, washer, polyamide (nylon) Sleeve and cone.
FEATURES AND ADVANTAGES
- Innovative product for anchoring in all types of base material.
- Fixings in hollow, solid and porous materials.
- Better mechanical anchoring for hollow bases.
- It has flaps to prevent false turns.
- Uniquely designed cone for greater safety during installation.
- Available in stainless steel.
MAIN APPLICATIONS
- Equipment (air conditioning, antennas, TVs, stands).
- Light metal parts (handrails, supports).
- Furniture (bookcases, shelves, cabinets).
Concrete and Cellular Concrete
Concrete block
Ceramic block
Solid brick
Stone
APPLICATION METHOD
Step: 1/4
Drill the hole to the diameter and depth indicated.
Step: 2/4
Clean the hole.
Step: 3/4
Adjust the anchor bolt, place it on the part to be fixed and insert it into the hole.
Step: 4/4
Tighten it to trigger its
expansion.
expansion.
VIDEO
TECHNICAL DATA
| Code | Thread diameter (inch) | Lengths | Hole | Distances ³ (mm) | Maximum thickness to be fixed (mm) | Wrench (inch) | Ultimate tensile loads² (kgf) | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Bolt (mm) | Sleeve (mm) | Diameter (in - mm) |
Minimum depth ¹ (mm) | Fastener fastener | Fastener edge | Concrete | Masonry | ||||
| XCBN14200 | 1/4″ | 2” | 45 | 3/8″ - 10 | 55 | 90 | 45 | 8 | 7/16″ | 398 | 214 |
| XCBN14300 | 3” | 70 | 80 | 140 | 70 | 561 | |||||
| XCBN56214 | 5/16″ | 2.1/4" | 50 | 1/2″ - 13 | 65 | 100 | 50 | 7 | 1/2″ | 510 | 255 |
| XCBN56314 | 3.1/4" | 75 | 90 | 150 | 75 | 612 | |||||
| XCBN38212 | 3/8″ | 2.1/2" | 54 | 9/16″ - 14 | 70 | 108 | 54 | 14 | 9/16″ | 612 | 268 |
| XCBN38312 | 3.1/2" | 80 | 95 | 160 | 80 | 16 | 714 | ||||
| XCBN12300 | 1/2″* | 3” | 64 | 3/4″ - 19 | 80 | 128 | 64 | 18 | 3/4″ | 785 | 367 |
| XCBN12412 | 4.1/2" | 102 | 120 | 204 | 102 | 20 | 918 | ||||
* 1/2" UNC - 13 threads.
(1) Minimum depth.
(2) The values obtained are based on the average of tests and technical specifications, using
G2 screws, 30MPa concrete and concrete block coated with 2 cm of mortar.
Attention: these values are ultimate loads, always use the safety coefficient.
For more information, see the Technical Data section on page 135. 135.
(3) Recommended minimum distance, for smaller distances consult the technical department.
Important: When installing anchor bolts in the stainless steel version, use a nylon sledgehammer
or rubber to avoid contaminating the surface of the fastener.
In the stainless steel version, the CBN is supplied with a stainless steel screw and washer
and a brass cone.
(1) Minimum depth.
(2) The values obtained are based on the average of tests and technical specifications, using
G2 screws, 30MPa concrete and concrete block coated with 2 cm of mortar.
Attention: these values are ultimate loads, always use the safety coefficient.
For more information, see the Technical Data section on page 135. 135.
(3) Recommended minimum distance, for smaller distances consult the technical department.
Important: When installing anchor bolts in the stainless steel version, use a nylon sledgehammer
or rubber to avoid contaminating the surface of the fastener.
In the stainless steel version, the CBN is supplied with a stainless steel screw and washer
and a brass cone.
![Item pba 1 thegem portfolio justified[1] copiar](https://ancora.com.br/wp-content/uploads/2024/09/pba.png)
